BuiltInFailures.RebarFailures

Public Class

Failures about Rebar.

Inheritance Hierarchy

System.Object
Autodesk.Revit.DB.BuiltInFailures.RebarFailures

Assembly: RevitAPI (in RevitAPI.dll) Version: 25.0.0.0 (25.0.0.0)

Syntax

public static class RebarFailures

The BuiltInFailures.RebarFailures type exposes the following members.

Properties

Name

Description

Public Property
Static Member

BarDiameterTooLarge

Rebar Bar Diameter is too large.

Public Property
Static Member

BarTypeDoesNotAllowHooksOfCurrentShape

You have selected a Bar Type which does not allow the Hooks used by the current shape. Please select a different Shape / Bar Type combination, or change the Hook permissions for the desired Bar Type (see Hook Lengths under Rebar Bar properties).

Public Property
Static Member

BendDiameterTooLarge

Rebar Bend Diameter is too large.

Public Property
Static Member

BendDiameterTooSmall

Rebar Bend Diameter is too small.

Public Property
Static Member

CannotCreateFreeFormSetDueToShortBar

Cannot create the rebar set using the current references because at least one bar is below the minimum allowed length. Edit the covers and extents of the set and try the desired layout options again.

Public Property
Static Member

CannotKeepVariabilityOfRebarInGroup

Modifications to the rebar set might cause it to revert to a uniform distribution and reset all disabled constraints. This can occur for layout changes as well as modifications to the geometry.

Public Property
Static Member

CannotPlaceRebar

Can’t find a host for Rebar.

Public Property
Static Member

CannotPlaceRebarWarn

Can’t find a host for Rebar.

Public Property
Static Member

CannotSolveRebarShapeUsingDataFromDimension

Cannot solve rebar shape using the current constraints.

Public Property
Static Member

CannotSolveRebarWithDelayedConstraints

There are rebar handles with invalid selected targets to constrain. The bar preview corresponds to latest valid constraints.

Public Property
Static Member

CantMakeFillets

The bar cannot be bent in that shape. Check the bending diameter and the bar type.

Public Property
Static Member

ChangeUnitsFormatWarn

The modification of the unit will cause the change of the Reinforcement rounding format. Do you want to continue?

Public Property
Static Member

ClearPresentationForAllBarsInRebarSet

All Bars in a Free Form Rebar Set have been hidden.

Public Property
Static Member

ConstraintForHandleIsDisabled

The constriant for current handle is disabled.

Public Property
Static Member

CoverTooLong

Rebar Cover length is too large for host thickness.

Public Property
Static Member

DelayedConstraintForHandle

The selected constraint targets do not satisfy a valid constraint. The rebar preview corresponds to latest valid rebar constraints.

Public Property
Static Member

HideAllBarsInRebarSet

All Bars in Rebar Set have been hidden.

Public Property
Static Member

HostTopologyChange

A reinforced host has undergone a major change. The reinforcement must be removed.

Public Property
Static Member

IncompleteShape

Rebar Shape [Family Name] is not fully defined and cannot be loaded into the project.

Public Property
Static Member

InvalidRebarHost

Rebar can be placed only in Concrete Structural elements.

Public Property
Static Member

InvalidRebarHostFamilyCanHostRebarParam

Rebar can’t be placed in this Generic Model element because rebar hosting is disabled in the family [Name].

Public Property
Static Member

InvalidRebarHostNonConcrete

Rebar can’t be placed in a structural family unless its [Material Type] is [Concrete].

Public Property
Static Member

InvalidRebarHostNonStructural

Rebar can’t be placed in a non-structural element.

Public Property
Static Member

InvalidRebarHostWrongCategory

Rebar can’t be placed in a family of category [Name].

Public Property
Static Member

Inverted3dShape

The Rebar Shape XX cannot be inverted.

Public Property
Static Member

MaxHookExtensionMultiplierWarn

The allowable range of values for the Rebar Hook Extension Multiplier is from 0.01 to 99.0.

Public Property
Static Member

MissingCurrentConstraintForHandle

The current handle has no constraint. Please select a valid target to apply a new constraint.

Public Property
Static Member

NoRebarSelected

At least one Rebar should be selected.

Public Property
Static Member

NoSurfPatternOnRebar

Rebar elements do not support surface patterns. The surface pattern associated with this material will not be displayed on the indicated Rebar Type.

Public Property
Static Member

NoVisibleRebarHandle

Editing of the constraints for the selected rebar with free form geometry is not available. However, the default automatic constraints may still work.

Public Property
Static Member

NoVisibleTargetsForCurrentConstraint

There are no visible constraint targets in the current view. Please switch to another view.

Public Property
Static Member

OutOfPlaneBendDiameterTooSmall

The Out of Plane Bend Diameter for Rebar Shape XX is too small for Rebar Bar Type YY.

Public Property
Static Member

OutSideOfHost

Rebar is placed completely outside of its host.

Public Property
Static Member

PathShapeFailure

Can’t solve Rebar Shape in Path Reinforcement.

Public Property
Static Member

RebarArrayTooShort

Rebar Set can’t have coincident Bars.

Public Property
Static Member

RebarBendRadiusTooBig

Rebar Bend Radius is too big. Ignoring bend.

Public Property
Static Member

RebarBendRadiusTooBigWarn

Rebar Bend Radius is too big. Ignoring bend.

Public Property
Static Member

RebarConstraintWarning

Structural rebar have automatic constraints that may conflict with dimensional constraints. Using dimensional constraints with structural rebar is not recommended and should be avoided.\nGrouped structural rebar is the only exception to this recommendation, since the automatic constraints are removed on grouped rebar.

Public Property
Static Member

RebarContainerOutSideOfHostWarning

Rebar Container is placed completely outside of its host.

Public Property
Static Member

RebarDimensionalConstraintLost

Dimensional constraint on Rebar element was lost on upgrade.

Public Property
Static Member

RebarEndTreatmentOverHook

Cannot set end treatment at an end that has hook.

Public Property
Static Member

RebarHookOverEndTreatment

Cannot set hook at an end that has end treatment.

Public Property
Static Member

RebarHooksDontMatchShape

The Rebar’s hooks do not match its Rebar Shape.

Public Property
Static Member

RebarIllegalBarType

There is Structural Rebar present in the project that no longer meet the criteria defined in Allowable Rebar Bar types parameter. Please review all existing Structural Rebar created with this Shape.

Public Property
Static Member

RebarInvalidDiameterRemoved

Invalid RebarBarType was removed on upgrade.

Public Property
Static Member

RebarMovedBarsOverlapped

There are identical overlapping bars in the rebar set. This will result in double counting in schedules.

Public Property
Static Member

RebarNoConstraints

The constraints for the rebar with free form geometry are not set or modifications have caused the automatic constraints to be deleted. You can use Edit Constraints to assign new bar constraints.

Public Property
Static Member

RebarNoMatchingHooks

The Rebar Shape ‘[Family Name]’ has no matching hooks.

Public Property
Static Member

RebarShapeFailure

Can’t solve Rebar Shape.

Public Property
Static Member

RebarShapeFailureCustomError

‘[ErrorMessage]‘

Public Property
Static Member

RebarShapeFailureCustomWarning

‘[ErrorMessage]‘

Public Property
Static Member

RebarShapeFailureDueToStaggerOffset

Can’t solve Rebar Shape using the exisintg stagger offsets.

Public Property
Static Member

RebarSpacingTooSmall

Bar Spacing is too small.

Public Property
Static Member

RebarTooShortImperial

The minimum length of rebar shape is 1 inch.

Public Property
Static Member

RebarTooShortMetric

The minimum length of rebar shape is 25 mm.

Public Property
Static Member

RemoveSpliceBetweenBars

Splice cannot be maintained.

Public Property
Static Member

SketchDimensionsRemoved

The sketch dimensions, that were used to create the sketch, have been removed from the completed rebar shape definition.

Public Property
Static Member

SketchDimsBWFRemoved

The sketch dimensions, that were used to create the sketch, have been removed from the completed bend profile definition.

Public Property
Static Member

SketchFreeFormSet

Sketching of a free form set produces only a single bar.

Public Property
Static Member

SketchNonPlanarFreeForm

The selected free form rebar is not planar. Sketching it will discard the current geometry.

Public Property
Static Member

SpliceTypeWasDeleted

Splice type was deleted.

Public Property
Static Member

StandardHookBendDiameterTooLarge

Rebar Standard Hook Bend Diameter is too large.

Public Property
Static Member

StandardHookBendDiameterTooSmall

Rebar Standard Hook Bend Diameter is too small.

Public Property
Static Member

TooLargeNumberOfBars

Rebar Set must contain at most 1002 bar locations.

Public Property
Static Member

TooSmallNumberOfBars

Rebar Set must contain at least two bar locations.

Public Property
Static Member

TrySmallerBarType

Rebar Bend Diameter is too large. Try a smaller Bar Type.

Public Property
Static Member

UnconstrainableRebarHandle

The rebar handle does not have any constraint targets.