BuiltInFailures.ElectricalFailures

Public Class

Failures about Electricity.

Inheritance Hierarchy

System.Object
Autodesk.Revit.DB.BuiltInFailures.ElectricalFailures

Assembly: RevitAPI (in RevitAPI.dll) Version: 25.0.0.0 (25.0.0.0)

Syntax

public static class ElectricalFailures

The BuiltInFailures.ElectricalFailures type exposes the following members.

Properties

Name

Description

Public Property
Static Member

AllSlotsOnPanelOccupied

All slots on panel: [Panel Name] are occupied. Some circuits will be disconnected from this panel.

Public Property
Static Member

BankDistanceSmallerThanDiameter

The distance value is smaller than the conduit diameter, please enter a larger value

Public Property
Static Member

CableTrayModified

The cable tray has been modified to be in the opposite direction or insufficient space to create the required fittings.

Public Property
Static Member

CannotAddMorePolesToCircuit

Empty slots are unavailable to hold the number of poles you specified for this spare. \nTo add more poles to this spare, you must free up slots by moving the circuits below the spare.

Public Property
Static Member

CannotAssignSecondaryDistSysToCircuit

Cannot assign or add [Element] to Circuit. There is no assigned secondary distribution system for [Element].

Public Property
Static Member

CannotConnectDifferentDesignOptsObjects

Cannot add or assign [Element] to circuit. Electrical objects belonging to different design options cannot be connected.

Public Property
Static Member

CannotCreatePanelScheduleDuetoNoDefaultTemplate

A panel schedule cannot be created for these panels. A default panel schedule template must be assigned for this template type.

Public Property
Static Member

CannotRemoveMembersInCircuitHavingParent

You have selected elements that are connected to a Panel object in a Circuit. These elements cannot be removed from the Circuit.

Public Property
Static Member

CircuitOverload

Total connected apparent power for Circuit [Name] is exceeding 80% of the defined rating ([Rating Value]).

Public Property
Static Member

CircuitsOverlapAndDeleteSpareSpace

More than one Spare/Space falls onto the same slot. These Spares/Spaces will be deleted.

Public Property
Static Member

CircuitsOverlapDisconnectCircuits

More than one circuit falls onto the same slot. These circuits will be disconnected.

Public Property
Static Member

ConduitModified

The conduit has been modified to be in the opposite direction or insufficient space to create the required fittings.

Public Property
Static Member

ElementsBelongToOtherCircuit

You have selected elements that are already part of other Circuits that have assigned Panels. The elements you selected cannot be added to this Circuit.

Public Property
Static Member

FamilyMismatchCircuit

The family no longer matches the properties for the Circuit. Disconnect the family from the Circuit?

Public Property
Static Member

FeedThroughLugsIsDisabled

The feed through lugs option is unchecked.

Public Property
Static Member

FeedThroughLugsIsNotEnabledAndBindFormulaInFamily

Can’t change connection type to Feed Through Lugs because Feed Through Lugs is unchecked. Enable Feed Through Lugs with related formula in family editor the Feed Through Lugs is mapped to. Select the panel -> Edit Family -> Family Types.

Public Property
Static Member

FeedThroughLugsIsNotEnabledAndBindGlobalParam

Can’t change connection type to Feed Through Lugs because Feed Through Lugs is not enabled. Enable Feed Through Lugs by enabling the global parameter that Feed Through Lugs is mapping. Click Manage tab -> Settings panel -> Global Parameters.

Public Property
Static Member

FeedThroughLugsIsOccupied

The feed through lugs is in use by circuit [Element].

Public Property
Static Member

FeedThroughLugsIsOccupiedAndDisconnectOtherCircuits

The feed through lugs is occupied, so other circuits connected with feed through lugs will be disconnected from this panel [Panel Name].

Public Property
Static Member

InvalidApparentPowerDensity

The Apparent Power Density is invalid. Edit the Power Density and/or Power Factor to recalculate the Apparent Power Density.

Public Property
Static Member

InvalidNumberOfCircuitValueForDataPanel

The number of circuits on the data panel currently exceeds the value you entered for Maximum Amount of Circuits parameter. Reduce the number of circuits on the equipment before changing this value.

Public Property
Static Member

InvalidNumberOfCircuitValueForSwitchPanel

The number of circuits on the switchboard currently exceeds the value you entered. Reduce the number of circuits on the equipment before changing this value.

Public Property
Static Member

InvalidNumwiresSinglephase

Invalid number of wires for single phase, only 2 and 3 are valid.

Public Property
Static Member

InvalidPathOfParallelConduits

Invalid path of parallel conduits

Public Property
Static Member

MaximumNumberOfPolesExceeded

You cannot add more poles to this spare, as doing so would exceed the maximum number of poles set for this equipment.

Public Property
Static Member

MismatchConnectorDistSysToCircuit

Cannot add [Element] to Circuit. The Type for the available connector does not match the Type ([Name]) for the Circuit.

Public Property
Static Member

MismatchDistributionSystem

[Name1] and [Name2] cannot connect with each other due to mismatched voltage or number of phases.

Public Property
Static Member

MismatchNmbAssignedDistSysToCircuit

Cannot assign or add [Element] to Circuit. There is no assigned distribution system for [Element].

Public Property
Static Member

MismatchNmbOfPolesToCircuit

Cannot add [Element] to Circuit. The Number of Poles for [Element] does not match the Number of Poles ([Name]) for the Circuit.

Public Property
Static Member

MismatchPoleBrakesSlotsNumbers

The number of pole breakers may not be less than the number of occupied slots.

Public Property
Static Member

MismatchVoltageLineToLine

Cannot assign or add [Element] to Circuit. The Voltage ([Voltage Value]) for the Circuit is out of range for the Line to Line Voltage for [Element] (The Line to Line Voltage is specified in the assigned Distribution System).

Public Property
Static Member

MismatchVoltageToCircuit

Cannot add [Element] to Circuit. The Voltage for [Element] is out of range for the Voltage ([Voltage Value]) for the Circuit.

Public Property
Static Member

MissingOrInvalidWireSizeTable

Wire Size Table “[Fail Name]” is missing or invalid. Use Electrical Settings to select a valid Wire Size Table.

Public Property
Static Member

NoAvailableMatchingConnector

Cannot add [Element] to Circuit. There is no available connector matching the Type ([Type Name]) for the Circuit.

Public Property
Static Member

NoDistributionSystem

The distribution system of [CategoryName] [Name] is set to None. Assign a distribution system.

Public Property
Static Member

NotAllowedCableTrayConduitRotation

Don’t allow to rotate a horizontal cable tray/conduit like this

Public Property
Static Member

NotEnoughAvailSlotsAndLugsOnPanel

You can’t connect to panel [Panel Name] because there aren’t enough slots and Feed Through Lugs is occupied. \nYou can increase the [ParameterName] to be greater than [Number] to connect through breaker slots or you can disconnect existing Feed Through Lugs connection.

Public Property
Static Member

NotEnoughAvailSlotsAndLugsOnSwitchPanel

You can’t connect to switchboard [Panel Name] because there aren’t enough space and circuit [Circuit Name] is set to Feed Through Lugs. \nYou can increase the number of circuits to be greater than [Number] to connect through breakers or you can disconnect circuit and select Feed Through Lugs again.

Public Property
Static Member

NotEnoughAvailSlotsOnDataPanel

You can’t connect to data panel [Panel Name] because there isn’t enough space \nYou can increase the number of circuits to be greater than [Number].

Public Property
Static Member

NotEnoughAvailSlotsOnPanel

You can’t change the connection type to Breakers connect to panel [Panel Name] because there aren’t enough slots. \nYou can increase the [ParameterName] to be greater than [Number] to connect through breaker slots or open the panel schedule and manually reshuffle non - consecutive slots.

Public Property
Static Member

NotEnoughRoomForParallelConduits

Due to changes in elevation, there is not enough room to generate all of the parallel conduits. As a result, some conduit segments have not been generated.

Public Property
Static Member

NotEnoughRoomForParallelPipes

Due to changes in elevation, there is not enough room to generate all of the parallel pipes. As a result, some pipe segments have not been generated.

Public Property
Static Member

NotEnoughSlotsOnlyLugAvailable

There aren’t enough slots on panel [Panel Name], so the circuit will connect through Feed Through Lugs.

Public Property
Static Member

NotEnoughSlotsOnlyLugAvailableForSwitchPanel

There aren’t enough space on switchboard [Panel Name], so the circuit will connect through Feed Through Lugs.

Public Property
Static Member

NotPositiveBendRadius

The value you entered for the bend radius is zero or a negative value. Enter a positive value.

Public Property
Static Member

NotSupportConcentricBend

Conduit with Fittings do not support Concentric Bend Radius, the bend radius of the conduit fittings will be same.

Public Property
Static Member

NumberOfCircuitFullOnSwitchPanel

You can’t change the connection type to Breakers and connect to switchboard [Panel Name] because there aren’t enough space. \nYou can increase the number of circuits to be greater than [Number] to connect through breakers.

Public Property
Static Member

ObjsDemolished

Cannot assign [Element] to circuit. Objects that are demolished cannot be added to a circuit.

Public Property
Static Member

PanelMismatchCircuitType

Cannot assign [Element] to Circuit. The Type for the panel does not match the Type ([Name]) for the Circuit.

Public Property
Static Member

PanelMismatchDistSysWhenCircuitAssigned

The selected circuit was added to panel [Element], but the distribution system for the panel does not match the power connector definition on the panel.

Public Property
Static Member

PrimaryNumOfPhasesNotEqualWithSecondary

Number of Phases of the primary distribution system isn’t equal with the secondary distribution system’s

Public Property
Static Member

ReplaceSpareSpaceOnPanelBoard

Need to replace spare or space on panelboard.

Public Property
Static Member

ReplaceSpareSpaceOnSwitchBoard

Need to replace spare or space on switchboard.

Public Property
Static Member

SecondaryNumOfPhasesNotEqualWithPrimary

Number of Phases of the secondary distribution system isn’t equal with the primary distribution system’s

Public Property
Static Member

SelectedElementsArePartOfOtherCircuit

You have selected elements that are already part of other Circuits. They will be removed from the original Circuits and added to this one.

Public Property
Static Member

SmallBendRadius

The value you entered for the bend radius for conduit is too small. Enter a larger value.

Public Property
Static Member

TransformerNoDistributionSystem

At least one of the distribution systems of Electrical Analytical Transformer [Name] is set to None. Assign distribution systems to the transformer.

Public Property
Static Member

UnsignedCircuit

Circuit is not assigned to a panel

Public Property
Static Member

UnsupportedTransformerPrimaryDS

[Distribution System Name] cannot appear on the primary side of the transformer.

Public Property
Static Member

VoltageIsOutOfRange

Cannot assign or add [Element] to Circuit. The Voltage ([Voltage Value]) for the Circuit is out of range for the Line to Ground Voltage for [Element] (The Line to Ground Voltage is specified in the assigned Distribution System).”

Public Property
Static Member

WireMaxSizeNonexistent

Cannot find max size in current wire type’s material table.