BuiltInFailures.ConnectorFailures
Failures about Connector.
Inheritance Hierarchy
System.Object
Autodesk.Revit.DB.BuiltInFailures.ConnectorFailures
Namespace: Autodesk.Revit.DB
Assembly: RevitAPI (in RevitAPI.dll) Version: 25.0.0.0 (25.0.0.0)
Syntax
public static class ConnectorFailuresThe BuiltInFailures.ConnectorFailures type exposes the following members.
Properties
Name
Description
Public Property
Static Member
AirTerminalCenterNotAligned
The center of the Air Terminal doesn’t align at (0,0,0): align the Air Terminal Center to the Origin Defining Reference Planes could help to solve the problem.
Public Property
Static Member
AllElementsRemovedFromCircuitGroup
[System] is empty and will be deleted.
Public Property
Static Member
DisconnectedElements
Elements are disconnected!
Public Property
Static Member
ElementAssignedToDefaultSystem
At least one connector on the highlighted element is currently assigned to the [Element Name]. In general items shouldn’t be assigned to the Default Systems, but should be assigned as equipments or elements of a non-default system. Click the More Info button below for additional information on System Creation.
Public Property
Static Member
ElementHasMultipleConnectors
Revit found one or more elements with multiple connectors. Select each element and then select the connectors to use for the analytical connection.
Public Property
Static Member
ElementsAreDisconnected
Elements need to be disconnected.
Public Property
Static Member
ElementsConnectedToParent
You have selected elements that are connected to a parent object in a System. These elements cannot be removed from the System.
Public Property
Static Member
ElementsNeedToBeDisconnected
Elements need to be disconnected.
Public Property
Static Member
ExistsForSelectedElement
Connections already exists for selected element.
Public Property
Static Member
FittingMustBeOnDuct
The [Tap] must be attached to duct.
Public Property
Static Member
FittingMustBeOnDuctWarn
The [Tap] must be attached to duct.
Public Property
Static Member
FittingMustBeOnPipe
The [Tap] must be attached to pipe.
Public Property
Static Member
FittingMustBeOnPipeWarn
The [Tap] must be attached to pipe.
Public Property
Static Member
InvalidConnectionRef
The selected fitting has invalid connections and must be deleted to continue.
Public Property
Static Member
InvalidConnector
The connector is invalid, the size cannot be determined from the connector.
Public Property
Static Member
InvalidLoadClassificationValue
The load classification parameter cannot be empty. Please select a valid load classification element for the connector parameter and the associated family parameter.
Public Property
Static Member
InvalidPowerFactorValue
The value for Power Factor must be between 0 and 1.
Public Property
Static Member
JointGenderMismatch
The element has a connector with a fitting joint gender mismatch
Public Property
Static Member
JointShapeMismatch
The element has a connector with a fitting joint shape mismatch
Public Property
Static Member
JointSizeMismatch
The element has a connector with a fitting joint size mismatch
Public Property
Static Member
JointTypeMismatch
The element has a connector with a fitting joint type mismatch
Public Property
Static Member
LayoutConnector
[Unassigned System Type] on Connector [Index Number].
Public Property
Static Member
MismatchNoAvailableConnector
Cannot add [Element] to System. There is no available connector matching the System Type ([Type Name]) for the System.
Public Property
Static Member
MultipleNetwork
Elements in [System Name] are not connected in a single physical network due to one or both of the following:\n- There are disconnects in the system’s physical network.\n- Elements in the system are connected to more than one physical network.
Public Property
Static Member
NetworkValidityError
The family is connected in a network and can no longer keep the connectivity. Disconnect the family from the network?
Public Property
Static Member
NetworkValidityErrorWasDisconnected
The family is connected in a network and can no longer keep the connectivity. Disconnect the family from the network?
Public Property
Static Member
NoLossDefined
No Loss Defined
Public Property
Static Member
NoSupportKCoefficientTable
“K Coefficient from table” is not supported on connector for the element
Public Property
Static Member
NotAllowedToModifyGroupElementsError
Connection to a group failed. Modification of elements within a group is not allowed.
Public Property
Static Member
NotAllowedToModifyGroupElementsWarning
Connection to a group failed. Modification of elements within a group is not allowed.
Public Property
Static Member
OpenConnector
The element has an open connector
Public Property
Static Member
RbsNetworkValidityError
The family is connected in a network and can no longer keep the connectivity.
Public Property
Static Member
RemoveConnectorLinksWarn
The links between connector [Index] and connector [Index], connector [Index] and connector [Index] are removed.
Public Property
Static Member
RemoveConnectorLinkWarn
The link between connector [Index] and connector [Index] is removed.
Public Property
Static Member
ShapesNotMatch
Shapes do not match. A connection could not be made.
Public Property
Static Member
SizingCalculationFlowOnlyWarn
Some elements are not sized because the system calculation is flow only. You may change the system calculation level to size them again.
Public Property
Static Member
SizingCalculationNoneWarn
Some elements are not sized because the system calculation level is none or performance. You may change the system calculation level to size them again.
Public Property
Static Member
SizingFailed
Sizing failed.
Public Property
Static Member
UnconnectedCircuit
The element has an unconnected circuit on its connector
Public Property
Static Member
UnconnectedDevice
Device has an unconnected [Type Name] connector (index = [Index Number]).
Public Property
Static Member
UndefinedConnector
Revit does not support Undefined connectors. The following have been replaced by the default connector: [Connector Element]