BuiltInFailures.SketchFailures

Public Class

Failures about Sketch.

Inheritance Hierarchy

System.Object
Autodesk.Revit.DB.BuiltInFailures.SketchFailures

Assembly: RevitAPI (in RevitAPI.dll) Version: 25.0.0.0 (25.0.0.0)

Syntax

public static class SketchFailures

The BuiltInFailures.SketchFailures type exposes the following members.

Properties

Name

Description

Public Property
Static Member

AreaLoadNoForce

Area Load can’t have all force components equal to zero.

Public Property
Static Member

AxisNotSpecified

Axis of revolution not specified.

Public Property
Static Member

BadNosingProfile

Stairs nosing profile must have one loop. Wrong profile will not be shown in profiles list in Stairs Type properties.

Public Property
Static Member

BadRailingsProfile

Rail profile must have one closed loop. Wrong profile will not be shown in profiles list for rail definition.

Public Property
Static Member

BeamDirectionNotSpecified

Beam direction not specified.

Public Property
Static Member

BeamDirectionNotSpecifiedError

Beam direction not specified.

Public Property
Static Member

BentFabricSheetClosedLoopInSketch

The bend profile cannot contain a closed loop. Click Continue to correct the profile or Click Quit sketching to exit the bend profile editor.

Public Property
Static Member

BentFabricSheetEmptySketch

The bend profile requires at least one segment to be placed in a host. Click Continue to correct the profile or Click Quit sketching to exit the bend profile editor.

Public Property
Static Member

BentFabricSheetInvalidElementInSketch

Arcs in a bend profile must be separated from one another with a connected straight segment. The bend profile cannot start or end with an arc. Click Continue to correct the profile or Click Quit sketching to exit the bend profile editor.

Public Property
Static Member

BentFabricSheetLinesOverlapOrIntersect

Segments in a bend profile cannot overlap, intersect, or be collinearly contiguous. Click Continue to correct the profile or Click Quit sketching to exit the bend profile editor.

Public Property
Static Member

BentFabricSheetManyLoopsInSketch

The bend profile cannot contain two or more disconnected segments. Click Continue to correct the profile or Click Quit sketching to exit the bend profile editor.

Public Property
Static Member

BentFabricSheetTooShortSegments

A segment in the bend profile is too short to apply the wire bend diameter. The bent fabric sheet of the selected type cannot be placed in a host. Click Continue to correct the profile or Click Quit sketching to exit the bend profile editor.

Public Property
Static Member

BoundaryNoOverlap

The split sketch is out of the boundary of split element sketch..

Public Property
Static Member

BuildingPadNoSurface

A Pad can’t extend beyond the edge of a Toposurface.

Public Property
Static Member

BuildingPadNoSurfaceError

A Pad can’t extend beyond the edge of a Toposurface.

Public Property
Static Member

CannotChangeUserSketchPlane

Can’t change plane of [Element Name] Sketch.

Public Property
Static Member

CannotChangeUserSketchPlaneError

Can’t change plane of [Element Name] Sketch.

Public Property
Static Member

CannotChangeWorkplaneVisibility

Can’t change Work Plane Visibility.

Public Property
Static Member

CannotComputeRailingsElevation

Can’t compute Railings Elevation Profile.

Public Property
Static Member

CannotComputeRailingsElevationError

Can’t compute Railings Elevation Profile.

Public Property
Static Member

CannotComputeRailingsElevationWarn

Can’t compute Railings Elevation Profile

Public Property
Static Member

CannotConvertSketch

Can’t convert Sketch to Rebar Shape.

Public Property
Static Member

CannotDrawExtrusionRoof

Can’t make extruded roof.

Public Property
Static Member

CannotDrawProfileRoof

Can’t make footprint roof.

Public Property
Static Member

CannotGetSketchReferences

Cannot find references to dimension sketch.

Public Property
Static Member

CannotHaveArcs

Sorry, we can’t use arcs here.

Public Property
Static Member

CannotHaveArcsPath3d

Sorry, we can’t use arcs here.

Public Property
Static Member

CircleMultiPlanarShapeInSketch

A circle can’t be converted to multiplanar shape.

Public Property
Static Member

ClosedProfileRoof

Extrusion roof sketch must be open. The roof’s thickness and material composition are defined in its type.

Public Property
Static Member

ConstantHeightNotParallel

Constant-height-defining lines must be parallel.

Public Property
Static Member

ConstantHeightNotParallelError

Constant-height-defining lines must be parallel.

Public Property
Static Member

ContainedInOtherLoops

When creating an opening, you cannot sketch loops within other loops. The highlighted loop(s) are contained within another loop.

Public Property
Static Member

ConvertSplineToLineFailed

Failed to convert spline to straight line

Public Property
Static Member

CurveFromPickedFailed

Can’t create boundary from pick.

Public Property
Static Member

CurveIntersectsCutFace

The highlighted line intersects the boundary of the face being modified. To modify a cut face, use open loops that end on the existing boundary without intersecting or overlapping existing edges.

Public Property
Static Member

CurveIntersectsSplitFace

The highlighted line intersects the boundary of the face being split. To split a face at its border, use an open loop that ends on the boundary of the face.

Public Property
Static Member

CurveTooShort

Line is too short.

Public Property
Static Member

DifferentOffsets

Adjacent slope-defining lines must have identical eave heights; the highlighted lines do not. You can use the Align Eaves tool to have the eaves aligned for you.

Public Property
Static Member

ElementsSketchTooLarge

The sketch defining the highlighted element is too large.

Public Property
Static Member

ElevationSketchNotAllowed

Wall in a family can’t have an elevation profile.

Public Property
Static Member

EndsNotOnCutFace

Ends of the sketched loop do not lie on the boundary of the face being modified.

Public Property
Static Member

EndsNotOnEdge

Ends of an open loop in sketch splitting face do not lie on an edge of the face to split.

Public Property
Static Member

FloorCannotAddDirectionCurve

Cannot add the direction curve in the floor sketch.

Public Property
Static Member

FloorCannotAddDirectionCurveError

Cannot add the direction curve in the floor sketch.

Public Property
Static Member

FloorDirectionNotSpecified

Structural floor span direction not specified.

Public Property
Static Member

FloorManyDirectionCurves

More than one span direction curve specified.

Public Property
Static Member

InvalidAreaLoadSketch

Area Load has invalid Sketch.

Public Property
Static Member

InvalidCropAreaSketch

Crop area sketch can either be empty or include one closed, not self-intersecting loop.

Public Property
Static Member

InvalidCropAreaSketchRegen

Crop area sketch can either be empty or include one closed, not self-intersecting loop.

Public Property
Static Member

InvalidElevationSketch

Elevation Profile sketch is invalid.

Public Property
Static Member

InvalidElevationSketchError

Elevation Profile sketch is invalid.

Public Property
Static Member

InvalidProfile

One or more profiles are invalid. Make sure that every used profile is a closed loop of non-intersecting lines.

Public Property
Static Member

InvalidProfileError

One or more profiles are invalid. Make sure that every used profile is a closed loop of non-intersecting lines.

Public Property
Static Member

InvalidRoofCurveloop

Base sketch for roof is invalid.

Public Property
Static Member

InvalidRoofCurveloopError

Base sketch for roof is invalid

Public Property
Static Member

InvalidRoofCurveloopFailure

Base sketch for roof is invalid

Public Property
Static Member

InvalidSketch

Sketch is invalid.

Public Property
Static Member

InvalidSketchError

Sketch is invalid.

Public Property
Static Member

InvalidSketchForBuildingpad

Pad sketch is invalid.

Public Property
Static Member

InvalidSketchForCeiling

Ceiling sketch is invalid.

Public Property
Static Member

InvalidSketchForFloor

Floor sketch is invalid.

Public Property
Static Member

InvalidSketchForRoofsoffit

Roof Soffit sketch is invalid.

Public Property
Static Member

InvalidSketchForToposolid

Toposolid sketch is invalid.

Public Property
Static Member

InvalidSketchPath3d

Sketch is invalid.

Public Property
Static Member

LandingNotEnoughBoundaryCurves

Sketch landing require boundaries

Public Property
Static Member

LandingTwoManyLoops

Sketch landing can only have one closed loop

Public Property
Static Member

LinesOverlap

Cannot have overlapping lines.

Public Property
Static Member

LinesOverlapError

Cannot have overlapping lines.

Public Property
Static Member

LinesOverlapPath3d

Cannot have overlapping lines.

Public Property
Static Member

LoopIntersect

Lines cannot intersect each other. The highlighted lines currently intersect.

Public Property
Static Member

LoopIntersectError

Lines cannot intersect each other. The highlighted lines currently intersect.

Public Property
Static Member

LoopIntersectPath3d

Lines cannot intersect each other. The highlighted lines currently intersect.

Public Property
Static Member

LoopsOutsideFaceSplit

Some of the lines drawn lie outside of the boundary of the face being split. All lines used to split a face must be contained within the face being split and cannot intersect or overlap any of the boundaries of that face.

Public Property
Static Member

LoopsOutsideFaceSplitterTooShort

Public Property
Static Member

ManyCCWLoops

Area defined by sketch must be connected.

Public Property
Static Member

ManyCCWLoopsError

Area defined by sketch must be connected.

Public Property
Static Member

ManyDirectionCurves

More than one direction curve specified.

Public Property
Static Member

ManyDirectionCurvesError

More than one direction curve specified.

Public Property
Static Member

MissingLapInSketch

Rebar Sketch does not have lapped lengths. A circular shaped Rebar needs overlapping legths. Please overlap one of the ends of the circular Rebar Sketch.

Public Property
Static Member

MoreThanOneAxis

More than one axes of revolution.

Public Property
Static Member

MutipleStairsPathInOneRunFailure

Each stairs run can only have one stairs path.

Public Property
Static Member

NestedLoops

Cannot have nested loops.

Public Property
Static Member

NoLoops

Sketch is empty.

Public Property
Static Member

NoLoopsError

Sketch is empty.

Public Property
Static Member

NoLoopsPath3d

Sketch is empty.

Public Property
Static Member

NonMonotoneRoof

All parts of an extruded roof must face upward. Make sure that no part of the sketch lies below any other part of the sketch.

Public Property
Static Member

NoPlane

Highlighted geometry no longer determines a plane

Public Property
Static Member

NotOneCCWLoop

This sketch defines more than one footprint. Make sure the sketch contains only one outermost loop and that there are no loops inside inner loops.

Public Property
Static Member

NotOneCurve

More than one curve not allowed.

Public Property
Static Member

NotOneCurveError

More than one curve not allowed.

Public Property
Static Member

NotOneCurvePath3d

More than one curve not allowed.

Public Property
Static Member

NotOneLoop

More than one loop not allowed.

Public Property
Static Member

NotOneLoopPath3d

More than one loop not allowed.

Public Property
Static Member

OpenAreaLoadLoop

Area Load Sketch can’t contain open loops.

Public Property
Static Member

OpenLoop

Lines must be in closed loops. The highlighted lines are open on one end.

Public Property
Static Member

OpenLoopError

Lines must be in closed loops. The highlighted lines are open on one end.

Public Property
Static Member

OpenLoopPath3d

Lines must be in closed loops. The highlighted lines are open on one end.

Public Property
Static Member

PathCannotBeClosedLoop

Path cannot be a closed loop.

Public Property
Static Member

PathCannotBeClosedLoopPath3d

Path cannot be a closed loop.

Public Property
Static Member

PathReinforcementClosedLoop

Sketch contains a closed loop. Can’t create Path Reinforcement.

Public Property
Static Member

PathReinforcementEmptySketch

Sketch is empty. Can’t create Path Reinforcement.

Public Property
Static Member

PathReinforcementManyLoops

Sketch contains more than one chain. Can’t create Path Reinforcement.

Public Property
Static Member

PlanarMultiPlanarShapeInSketch

The current shape is only bent in a single plane. A multi-planar definition is not required. Please redefine the shape on the top plane only.

Public Property
Static Member

RailingDoublyConnected

Railings hosted on Stairs must form a single, open, connected line.

Public Property
Static Member

RailingDoublyConnectedError

Railings hosted on Stairs must form a single, open, connected line.

Public Property
Static Member

RailingNotConnected

The Railing line must be a single connected Sketch. If you want separate pieces of Railing, create two or more separate Railings.

Public Property
Static Member

RailingNotConnectedError

The Railing line must be a single connected Sketch. If you want separate pieces of Railing, create two or more separate Railings.

Public Property
Static Member

RebarEmptySketch

Rebar Sketch is empty. Can’t create Rebar.

Public Property
Static Member

RebarEmptySketchError

Rebar Sketch is empty. Can’t create Rebar.

Public Property
Static Member

RebarManyLoops

Rebar Sketch contains more than one loop. Can’t create Rebar.

Public Property
Static Member

RebarManyLoopsError

Rebar Sketch contains more than one loop. Can’t create Rebar.

Public Property
Static Member

RebarSystemDirectionNotSpecified

Major direction not specified.

Public Property
Static Member

RebarSystemDirectionNotSpecifiedError

Major direction not specified.

Public Property
Static Member

RunInvalidSketch

Invalid sketch, can’t create run by this sketch

Public Property
Static Member

RunNotEnoughBoundaryCurves

Sketch run require boundaries (chains of one or more Boundary Lines)

Public Property
Static Member

SculptingCurvesCannotFormClosedLoop

Curves cannot form a closed loop.

Public Property
Static Member

SculptingCurvesCrossAxis

The highlighted curves cross the axis.

Public Property
Static Member

SculptingCurvesTouchAxis

The highlighted curves touch the axis.

Public Property
Static Member

SculptingLoopsOnBothSidesOfAxis

All curves must be on the same side of the axis.

Public Property
Static Member

SculptingSingleLineLoopLiesOnAxis

The highlighted lines lie on the axis.

Public Property
Static Member

ShortCurveInSketch

The sketch contains an extremely short line.

Public Property
Static Member

ShortCurveInSketchRoof

The sketch contains an extremely short line.

Public Property
Static Member

SiteCannotDrawSurfaceBoundary

Cannot make surface with specified boundary.

Public Property
Static Member

SketchedRunInvalidPath

Invalid stair path. Stair path should connect both start and end riser, and cross all other risers.

Public Property
Static Member

SketchedShapeNotAvailable

Skeched shape is not available for this type of element.

Public Property
Static Member

SketchFailurePlanes

Sketch is no longer parallel to its defining plane

Public Property
Static Member

SketchingInTheWrongView

Detail sketch is only editable in [View Type].

Public Property
Static Member

SketchingInWrongView

Detail sketch is not editable in this view.

Public Property
Static Member

SketchOverconstrained

Sketch is overconstrained.

Public Property
Static Member

SketchOverconstrainedError

Sketch is overconstrained.

Public Property
Static Member

SketchOverconstrainedWarn

Sketch is overconstrained.

Public Property
Static Member

SketchTooLarge

Sketch is too large.

Public Property
Static Member

SketchWasDeleted

Sketch was deleted.

Public Property
Static Member

StairClosedBoundaries

Stairs Boundaries (chains of one or more Boundary Lines) should not form closed loops.

Public Property
Static Member

StairClosedBoundariesError

Stairs Boundaries (chains of one or more Boundary Lines) should not form closed loops.

Public Property
Static Member

StairNotEnoughBoundaryCurves

Stairs require boundaries (chains of one or more Boundary Lines) on each side of the Stair.

Public Property
Static Member

StairNotEnoughBoundaryCurvesError

Stairs require boundaries (chains of one or more Boundary Lines) on each side of the Stair.

Public Property
Static Member

StairNotEnoughRiserCurves

Boundaries (chains of one or more Boundary Lines) must be connected by at least two Riser Lines.

Public Property
Static Member

StairNotEnoughRiserCurvesError

Boundaries (chains of one or more Boundary Lines) must be connected by at least two Riser Lines.

Public Property
Static Member

StairOnlyOneConnectedBoundary

Stairs require no less than two boundaries (chains of one or more Boundary Lines).”

Public Property
Static Member

StairOnlyOneConnectedBoundaryError

Stairs require no less than two boundaries (chains of one or more Boundary Lines).

Public Property
Static Member

StairRiserDoesntIntersectBoundary

The line representing the top of a riser does not intersect one or both of the boundary lines.

Public Property
Static Member

StairRiserDoesntIntersectBoundaryError

The line representing the top of a riser does not intersect one or both of the boundary lines.

Public Property
Static Member

StairTooManyConnectedBoundaries

Stairs require no more than two boundaries (chains of one or more Boundary Lines).

Public Property
Static Member

StairTooManyConnectedBoundariesError

Stairs require no more than two boundaries (chains of one or more Boundary Lines).

Public Property
Static Member

SubregionNoHostSurf

A Subregion cannot be created outside the boundary of a Toposurface. A Subregion should be completely inside a Toposurface or overlap a Toposurface.

Public Property
Static Member

SuggestMakingFamilyNonParametric

Performance Warning: This family now contains both labeled dimensions and sketches with many segments. This may hurt performance. To improve performance, create elements that require complex sketches as nested families.

Public Property
Static Member

SuspendedSketchWarn

Highlighted element’s sketch could not regenerate and has been suspended. Select the element and edit its sketch to fix the problem. The element will display in magenta until you fix the problem

Public Property
Static Member

TooFewParamsForSketch

The sketched Structural Rebar element has too many segments to be properly parameterized. Please reduce the number of segments.

Public Property
Static Member

TooManyElementsInSketch

This sketch is large. Performance will improve if constructed as several independent sketches.

Public Property
Static Member

TooManySlopes

There is more than one slope defined.

Public Property
Static Member

TooManySlopesError

There is more than one slope defined.

Public Property
Static Member

TrussClosedReference

Truss references (chains of one or more reference lines) should not form closed loops.”

Public Property
Static Member

TrussCrossingReferences

Truss top and bottom references cannot cross.

Public Property
Static Member

TrussMissingReference

Trusses require both a top and a bottom chord reference (chain of one or more reference lines).

Public Property
Static Member

TrussOverlappingReference

Truss references (chains of one or more reference lines) cannot overlap themselves in the vertical direction.

Public Property
Static Member

TrussSegmentedReference

Truss reference must form a continuous chain of one or more sketch lines.

Public Property
Static Member

TrussShiftedReferences

Truss top and bottom references (chains of one or more reference lines) must overlap at least partially in the vertical direction.

Public Property
Static Member

TrussSwappedReferences

Truss top reference must be above the bottom reference.

Public Property
Static Member

UnsatisfiedSupportAssocProp

Constraint between a Line created with Pick Support and the Support is not satisfied.

Public Property
Static Member

UnsatisfiedWallAssocProp

Constraint between a Line created with Pick Wall and the Wall is not satisfied.

Public Property
Static Member

VarSketchFailure

Constraints defined by highlighted Lines and Dimensions can’t be satisfied.

Public Property
Static Member

VarSketchInElementFailure

The constraints of the sketch defining the highlighted element cannot be satisfied.

Public Property
Static Member

WrongCutBoundaryLoops

Only open loops can be used for Edit Cut Profile. All open ends must lie on the boundary of the cut profile, and the loop may not touch the boundary anywhere except at its ends.

Public Property
Static Member

WrongFaceSplitterLoopTypesNum

Sketch for splitting the face is invalid. Faces may be split either by a single closed loop that is contained within the face or by one or more open loops whose ends lie on the boundary of the face. None of the lines in the sketch are allowed to overlap or intersect the boundaries of the face.