PostableCommand
Enumerates all of the built-in commands which can be posted by an API application.
Namespace: Autodesk.Revit.UI
Assembly: RevitAPIUI (in RevitAPIUI.dll) Version: 25.0.0.0 (25.0.0.0)
Syntax
public enum PostableCommandMembers
Member name
Value
Description
RoofByFace
20
Creates an element using a non-vertical face of a mass.
Soffit
493
Creates a roof soffit in the building model.
LoadAsGroupIntoOpenProjects
786
Loads the current project as a group into another open project or family.
LoadIntoProject
791
Loads the rebar shape into open projects or family files.
RepeatComponent
840
Repeats the selected applied component along a divide path or surface.
ConnectionSettings
996
Opens the Structural Connections Settings dialog in which you can load and unload add-in connections into Revit. If no add-ins are present, no connections are available in the Connections tab.
StructuralConnection
997
Adds a structural connection to structural elements.
ShowWarningsInViews
1,000
Select to show structural connection warning marks in your project views. Deselect to hide warning marks.
ViewList
1,075
Creates a schedule of the views in the project.
LinearDimensionTypes
1,081
Defines attributes for linear (horizontal and vertical) dimensions.
AngularDimensionTypes
1,082
Defines attributes for angular dimensions.
SplitElement
1,100
Cuts an element into separate individual elements.
SpotElevation
1,109
Displays the elevation of a selected point.
SpotCoordinate
1,114
Displays the North/South and East/West coordinates of points in a project.
AlignmentStation
1,115
Add an individual alignment station annotation.
AlignmentStationSet
1,116
Add a series of alignment station annotations.
RoofByFootprint
1,142
Creates a roof using the building footprint to define its boundaries.
RoofByExtrusion
1,143
Creates a roof by extruding a profile that you sketch.
RadialDimensionTypes
1,199
Defines attributes for radial dimensions.
ReloadLatest
1,729
Loads updates from the central model to your local copy of the project.
Render
1,782
Creates a photorealistic image of a building model.
ShowHistory
1,985
Displays a list of all the times a workshared file (the central model or a local copy of the central model) was saved and who saved it.
GrayInactiveWorksets
2,765
Displays elements in inactive worksets as gray to visually distinguish them from elements in active worksets.
DrawOnFace
3,096
Draws lines on existing surfaces.
DrawOnWorkPlane
3,097
Draws lines on the active work plane.
ImportGBXML
3,102
Imports analysis data from a gbXML file.
ExportReportsRoomOrAreaReport
3,125
Saves a schedule or Room/Area report.
SheetIssuesOrRevisions
3,153
Specifies revision information for the project.
RevisionSchedule
3,154
Adds a revision schedule to a custom title block.
CalloutTags
3,167
Specifies the callout head for callout tags, and the radius of the callout bubble.
ElevationTags
3,168
Defines properties for elevation tags.
SectionTags
3,169
Specifies the shape of heads and tails for section tags.
FloorByFaceFloor
3,234
Converts a mass floor into a floor of the building model.
HideCategory
3,240
Hides all elements that belong to a selected category in the current view.
RunInterferenceCheck
3,259
Locates invalid intersections between elements in a project.
SpecifyCoordinatesAtPoint
3,266
Relocates a model and rotates the model to True North by specifying coordinates for North/South, East/West, and Elevation.
ExportIFC
3,278
Saves an IFC file.
SystemBrowser
3,280
Displays the System Browser. Displays a hierarchical list of all the components in each discipline in a project, either by system or by zone.
ExportCADFormatsSTEP
3,340
Creates DWG, DXF, DGN, OBJ, SAT, STL or STEP files.
ExportDWFOrDWFx
3,341
Creates DWF or DWFx files.
ExportCADFormatsDWG
3,342
Creates DWG, DXF, DGN, OBJ, SAT, STL or STEP files.
ExportCADFormatsDXF
3,343
Creates DWG, DXF, DGN, OBJ, SAT, STL or STEP files.
ExportCADFormatsDGN
3,344
Creates DWG, DXF, DGN, OBJ, SAT, STL or STEP files.
ExportCADFormatsACIS_SAT
3,345
Creates DWG, DXF, DGN, OBJ, SAT, STL or STEP files.
ExportPDF
3,346
Creates PDF files.
ExportCADFormatsSTL
3,347
Creates DWG, DXF, DGN, OBJ, SAT, STL or STEP files.
ExportCADFormatsOBJ
3,348
Creates DWG, DXF, DGN, OBJ, SAT, STL or STEP files.
OpenIFC
3,355
Opens an IFC file.
RelinquishAllMine
3,363
Releases ownership of worksets and borrowed elements that have not been changed.
MaterialTakeoff
3,388
Creates a list of the sub-components or materials of any Revit family category.
DWFMarkup
3,401
Links marked-up DWF files into a Revit project so you can see the markups on corresponding sheets.
ImportTypes
3,404
Imports family types from a text (.txt) file into the current family.
ExportExportTypes
3,405
Exports family types from the current family to a text (.txt) file.
OpenIFCOptions
3,409
Sets options for the IFC template and class mapping.
KeynoteLegend
3,449
Creates a list of the keynotes used in a project, and their definitions.
KeynotingSettings
3,450
Specifies the location of the keynote table and the numbering method for keynotes.
Web
3,619
Draws the web elements between the chords.
TopChord
3,620
Draws the top chord of the truss family.
BottomChord
3,621
Draws the bottom chord of the truss family.
ShapeStatus
3,640
When enabled, this button indicates that the rebar shape is not valid.
TogglePropertiesPalette
4,534
Displays or hides a palette where you can view and edit instance properties.
StatusBarWorksets
4,609
For a workshared project, displays the active workset and the number of Others’ pending Editing Requests in the status bar.
StatusBarDesignOptions
4,610
Displays the active design option in the status bar.
ReinforcementNumbers
4,700
Defines or edits numbering sequences by partition for rebar and fabric sheets.
FamilyCategoryAndParameters
10,133
Assigns the properties of a predefined family category to the component you are creating.
ExportImagesandAnimationsWalkthrough
12,059
Saves animations or image files.
ExportImagesandAnimationsSolarStudy
12,075
Saves animations or image files.
SunSettings
12,299
Specifies the location of the sun for solar studies, walkthroughs, and rendered images.
Grid
32,770
Places column grid lines in the building design.
ArchitecturalWall
32,771
Creates a non-structural wall in the building model.
Door
32,772
Adds doors to the building model.
Window
32,773
Adds windows to the building model.
Delete
32,778
Removes selected elements from the building model.
Space
32,784
Places analytical spaces to account for the entire volume within the model. This includes rooms, plenums and chases.
SpaceTag
32,785
Labels spaces in a project.
SpaceSeparator
32,786
Draws a space separation line to divide space.
TypeProperties
32,790
Displays properties for the family type to which the selected element belongs.
Level
32,794
Adds a level to the model.
FramingElevation
32,814
Creates a framing elevation to show vertical bracing.
ArchitecturalFloor
32,914
Creates a floor for the current level of the building model.
Stair
32,916
Adds a stair to the building model by creating common run, landing, and support components.
ArchitecturalColumn
32,918
Adds architectural columns to the building model.
MirrorProject
32,919
Flips the position of a project around a selected axis.
RotateProjectNorth
32,920
Changes the relationship of elements relative to Project North (the top of the drawing area) in plan views.
Rotate
32,934
Rotates selected elements around an axis.
MirrorPickAxis
32,936
Reverses the position of selected elements, using an existing line or edge as the mirror axis.
LineWeights
32,946
Creates or modifies line weights.
ObjectStyles
32,947
Specifies line weights, colors, and patterns, and materials for model objects, annotation objects, and imported objects.
AnalysisDisplayStyles
32,948
Specifies a presentation format for visualizing analysis results.
Snaps
32,949
Specifies snap increments, and enables or disables snap points.
ProjectUnits
32,950
Specifies the display format for units of measure.
StructuralPlan
32,952
Creates a structural plan view.
FloorPlan
32,953
Creates a floor plan view.
Section
32,955
Creates a section view.
Camera
32,956
Creates a 3D view from the perspective of a camera placed in the view.
ProjectBrowser
32,957
Displays the Project Browser.
NewSheet
32,958
Creates a page for a document set.
ImportCAD
32,959
Imports data or 3D geometry from other CAD programs to a Revit model or family.
LinkCAD
32,961
Links a CAD file to the current Revit project.
PointCloud
32,963
Links a Point Cloud file (*.rcp or *.rcs) into the current project.
NewFamily
32,983
Creates a set of custom components to use in projects.
LoadShapes
32,984
Loads a Revit family into the current file.
NewConceptualMass
32,986
Opens a template for creating a conceptual massing model.
LoadAutodeskFamily
32,990
Load an Autodesk family from the cloud.
Pin
32,997
Locks a model element in place.
Walkthrough
33,000
Creates an animated 3D walkthrough of a model.
Unpin
33,001
Unlocks a model element so it can move.
SolidExtrusion
33,002
Creates a 3D solid by extruding a 2D shape (profile).
PlaceAComponent
33,003
Places an element in the building model, based on a selected element type.
ModelLine
33,006
Creates a line that exists in 3D space and is visible in all views of a project.
StairPath
33,010
Annotates the slope direction and walk line of a stair.
ReferencePlane
33,026
Creates a reference plane using drawing tools.
Redo
33,031
Reverses the effects of the previous UNDO command
Undo
33,032
Reverses the most recent action
Control
33,034
Adds a flip arrow to the view.
PickAPlane
33,078
Select a plane in the view to define a new workplane.
Filters
33,099
Creates a filter to modify the visibility and graphics of elements in views based on element parameters.
TemporaryDimensions
33,100
Specifies the placement and component references for temporary dimensions.
LinePatterns
33,120
Creates or modifies line patterns.
Array
33,121
Creates a linear or radial array of selected elements.
Move
33,127
Moves selected elements to the specified location in the current view.
Copy
33,129
Copies selected elements and places them in the specified location in the current view.
PlaceView
33,132
Adds a view to a sheet.
Text
33,134
Adds text annotations (notes) to the current view.
NewTitleBlock
33,140
Opens a template for creating a Title Block family.
AutomaticCeiling
33,158
Creates a ceiling at a specified distance above the level in which it resides.
FillPatterns
33,163
Creates or modifies drafting patterns and model patterns.
Default3DView
33,169
Opens the default orthographic 3D view.
Label
33,174
Creates a label for the annotation symbol.
VisibilityOrGraphics
33,175
Overrides the default visibility and graphic display of model elements and annotations in the current view.
Opening
33,177
Creates an opening in a host, such as a wall or ceiling.
NewProject
33,179
Creates a Revit project file.
ActivateView
33,181
Enables you to modify the selected view without leaving the sheet.
Materials
33,184
Specifies the materials and associated properties to apply to model elements or families.
DeactivateView
33,185
Deactivates the view, so you can no longer change the view from the sheet.
MaterialAssets
33,186
Modifies the assets that define a material.
DecalTypes
33,188
Creates a decal that you can use to place images on surfaces of a building model for rendering.
Options
33,195
Display Revit Options Dialog.
Room
33,198
Creates a room bounded by model elements (such as walls, floors, and ceilings) and separation lines.
CurtainGrid
33,199
Creates a grid line in a curtain wall or curtain system.
CurtainWallMullion
33,200
Creates a horizontal or vertical mullion on a curtain grid.
FamilyTypes
33,203
Allows you to enter parameter values for existing family types, add parameters to the family, or create new types within the family.
FilledRegion
33,204
Creates a 2D, view-specific graphic with a fill pattern and a boundary line.
RoomTag
33,208
Tags the selected room.
Align
33,218
Aligns one or more elements with a selected element.
Symbol
33,221
Places a 2D annotation drawing symbol in the current view.
DuplicateView
33,245
Creates a view that contains only the model geometry from the current view.
ExportOptionsExportSetupsDGN
33,248
Sets export options for CAD and IFC.
ExportOptionsExportSetupsDWGOrDXF
33,251
Sets export options for CAD and IFC.
ColorFillLegend
33,252
Places a legend in a view to indicate the meanings of color fills for rooms or areas.
BuildingElevation
33,255
Creates an elevation view.
JoinOrUnjoinRoof
33,277
Connects roofs to other roofs or walls, or reverses a previous join.
SolidBlend
33,278
Creates a solid 3D shape that changes along its length, blending from a starting shape to an ending shape.
ManageLinks
33,279
Provides options for managing linked files to building models.
SolidRevolve
33,287
Creates a 3D shape by sweeping a 2D profile around an axis.
ScheduleOrQuantities
33,296
Creates a key schedule or a schedule of building components.
Callout
33,298
Creates a rectangular callout in the view.
SolidSweep
33,300
Creates a 3D shape by sweeping a 2D profile along a path.
CreateGroup
33,305
Creates a group of elements for easy reuse.
Ramp
33,316
Adds a ramp to the building model.
RoomSeparator
33,318
Creates a separation line to bound rooms where no walls or other room-bounding elements exist.
AlignedToCurrentView
33,320
Pastes elements that were cut or copied from another view into the current view.
AlignedToPickedLevel
33,321
Pastes the selected elements into a elevation view or a section view.
WallJoins
33,323
Changes how walls join together (butt, miter, square off).
StartingView
33,327
Specifies the view that first displays when you open the model.
AlignedToSelectedLevels
33,328
Pastes multiple elements from one level to specified levels.
TagByCategory
33,329
Attaches a tag to an element based on the element category.
AlignedToSelectedViews
33,332
Pastes selected elements, including view-specific elements such as dimensions, into specified views.
LoadedTagsAndSymbols
33,338
Lists the tags and symbols that will be used for each element category.
NewAnnotationSymbol
33,339
Creates a tag or symbol to identify elements in the project.
AlignedToSamePlace
33,341
Pastes the elements to the same place from which they were cut or copied.
SpotSlopeTypes
33,348
Defines attributes for spot slopes.
Arrowheads
33,349
Specifies line weights, fills, and styles for annotation arrowheads.
SpotElevationTypes
33,350
Defines attributes for spot elevations.
SpotCoordinateTypes
33,351
Defines attributes for spot coordinates.
ReviewWarnings
33,352
Displays a list of messages that you can ignore or resolve.
AlignmentStationLabelTypes
33,354
Defines attributes for Alignment Station Labels.
LineStyles
33,360
Creates or modifies line styles.
ReflectedCeilingPlan
33,380
Creates a reflected ceiling plan view.
DetailLevel
33,384
Specifies the detail level (coarse, medium, or fine) that applies to each view scale by default.
VoidExtrusion
33,397
Creates a 3D shape that is then used to remove part of a solid 3D shape.
VoidBlend
33,398
Creates a 3D blend, which is then used to remove part of a solid 3D shape.
VoidRevolve
33,399
Creates a 3D shape by sweeping a 2D profile around an axis, and uses the 3D shape to remove part of a solid 3D shape.
VoidSweep
33,400
Creates a 3D shape by sweeping a 2D profile along a path, and uses the resulting 3D shape to remove part of a solid 3D shape.
CutGeometry
33,407
Selects the geometry to cut.
UncutGeometry
33,408
Selects which geometry does not get cut when you join geometry.
PlaceDetailGroup
33,421
Places an instance of a detail group in the view.
OverrideByCategory
33,422
Changes the graphic display settings for all elements that belong to the same category as the selected element in the current view.
DetailComponent
33,424
Adds a view-specific detail component to a view.
DetailLine
33,425
Creates view-specific lines.
Insulation
33,432
Places a batt insulation graphic in a detail view.
CreateSimilar
33,441
Places an element of the same type as the selected element
Worksets
33,460
Creates worksets and adds elements to them.
Phases
33,472
Specifies project phases, phase filters, and graphic overrides for phases.
PropertyLine
33,480
Creates a property line in a plan view.
ImportImage
33,499
Imports a raster image into a Revit project to use as a background image or visual aid during the creation or presentation of the model.
ImportPDF
33,503
Inserts a PDF file into a model view to use as a background image or visual aid.
MatchTypeProperties
33,513
Converts one or more elements to match the type of another element in the same view.
ScopeBox
33,519
Controls the visibility of datum elements (grids, levels, and reference planes) in specific views.
Linework
33,520
Overrides the line style for a selected line in the active view only.
SetWorkPlane
33,527
Specifies the work plane for the current view or for a selected work-plane-based element.
DraftingView
33,530
Creates a view showing details that are not directly associated with the building model.
Legend
33,531
Creates a list of building components and annotations used in a project.
Demolish
33,534
Marks elements as demolished in the current phase.
RevisionCloud
33,540
Adds a revision cloud to the current view or sheet to indicate design areas that have changed.
SynchronizeAndModifySettings
33,542
Allows you to specify options for the synchronization operation.
ProjectInformation
33,543
Specifies basic information about the project, including the project status and client information.
ModelInPlace
33,544
Creates a component that is unique to the project.
SheetList
33,631
Creates a schedule that lists the drawings in the project.
AreaPlan
33,638
Creates an area plan view.
GradedRegion
33,640
Modifies topography to indicate changes during the construction process.
ManageImages
33,648
Lists all raster images used in the project.
ApplyTemplatePropertiesToCurrentView
33,651
Applies properties stored in a view template to the current view.
RevealWall
33,654
Extrudes a profile along a path to create a cutout in a wall.
SweepWall
33,655
Creates a wall sweep by extruding a profile along a path.
Paint
33,656
Applies a material to the face of an element.
RemovePaint
33,657
Removes paint from selected faces.
NoteBlock
33,659
Creates a schedule of annotations added using the Symbol tool.
ModelText
33,660
Adds 3D text to the building model.
ShowHiddenLinesByElement
33,671
Displays hidden lines for individual model elements and detail elements that are obscured by other elements in the current view.
RemoveHiddenLinesByElement
33,673
Removes hidden lines for model elements and detail elements that are obscured by other elements in the active view only.
ManageViewTemplates
33,683
Displays parameters for view templates in the project.
CreateTemplateFromCurrentView
33,684
Creates a view template using the properties of the current view as the basis for the new template.
SplitFace
33,689
Divides the face of an element (such as a wall or floor) into regions for the application of different materials.
RestoreBackup
33,690
Rolls back changes made to a workshared project, or saves a selected backup version to be the current working model.
ExportODBCDatabase
33,693
Saves model data to an ODBC database.
LoadAsGroup
33,695
Loads a Revit file as a group.
SaveAsLibraryGroup
33,696
Saves a copy of all loaded families, the selected family, group, or view to your library.
ParkingComponent
33,698
Adds parking spaces to a topography.
TransferProjectStandards
33,699
Copies selected project settings from another open project to the current project.
SymbolicLine
33,700
Creates lines that are meant for symbolic purposes only, and are not part of the actual geometry of the component or building model.
CutProfile
33,709
Changes the shape of elements that are cut in a view, such as roofs, walls, floors, and the layers of compound structures.
ExportReportsSchedule
33,710
Saves a schedule or Room/Area report.
CloseInactiveViews
33,712
Closes open views except for the currently active view. The current view remains open in the drawing area.
AreaTag
33,718
Tags the selected area.
AreaBoundary
33,719
Defines boundaries for areas.
Area
33,720
Creates an area defined by walls and boundary lines.
JoinGeometry
33,729
Creates clean joins between 2 or more host elements that share a common face, such as walls and floors.
UnjoinGeometry
33,730
Removes a join between 2 or more elements.
SwitchJoinOrder
33,731
Changes the order in which elements join with one another.
TagAllNotTagged
33,735
Adds tags to multiple elements in one step.
SharedParameters
33,748
Specifies parameters that can be used in multiple families and projects.
LegendComponent
33,751
Adds a graphic representation of a selected model element to a legend view.
Offset
33,757
Copies or moves a selected element (such as a line, wall, or beam) a specified distance perpendicular to its length.
PurgeUnused
33,780
Removes unused families and types from a project.
PlaceDecal
33,789
Places an image on surfaces of a building model for rendering.
TitleBlock
33,806
Creates a title block element in a sheet view.
RebarLine
33,810
Defines lines and geometry of the rebar shape.
LabelContours
33,820
Displays the elevations of contour lines.
SplitWithGap
33,829
Splits a wall, pipe, duct, cable tray, conduit, structural framing or a column into 2 segments with a defined gap.
ThinLines
33,834
Displays all lines on screen as a single width, regardless of zoom level.
LinkRevit
33,836
Links another Revit model to the current model.
ExportImagesandAnimationsImage
33,838
Saves animations or image files.
ProjectParameters
33,855
Specifies parameters that can be added to categories of elements in a project, and used in schedules.
RelocateProject
33,856
Moves the model relative to the shared coordinate system.
RotateTrueNorth
33,857
Changes the angle for a project relative to True North.
DuplicateWithDetailing
33,858
Creates a view that includes model geometry and view-specific elements from the current view.
Location
33,862
Specifies the geographic location for the project.
AcquireCoordinates
33,863
Determines the coordinates used in a linked project, and uses them for the current project.
ReportSharedCoordinates
33,865
Displays shared coordinates of a linked model within a host model.
IdsOfSelection
33,866
Displays unique identifiers for the selected elements.
SelectById
33,867
Uses an element’s unique identifier to locate and select the element in the current view.
PublishCoordinates
33,869
Determines the coordinates used in the current model, and uses them for a linked model.
ParametersService
33,870
Use the Parameters Service to manage shared parameters and import them into a Revit session.
PlanRegion
33,900
Creates a plan region within a view.
BrowserOrganization
33,904
Changes the way that views are listed in the Project Browser.
Matchline
33,905
Adds matchlines to indicate where a view is split.
ViewReference
33,906
Adds an annotation indicating the sheet number and detail number for a selected view.
DesignOptions
33,907
Creates and manages design option sets and individual design options for the project.
AddToSet
33,908
Moves selected elements from the main model to one or more design options in a set.
PickToEdit
33,910
Opens a design option for editing by selecting an element contained in the option.
EditingRequests
33,911
Displays a list of other users’ requests to borrow elements in your worksets, and your pending requests.
SaveAsLibraryFamily
33,923
Saves a copy of all loaded families, the selected family, group, or view to your library.
Railing
34,969
Creates a railing by sketching the railing path.
Beam
34,972
Adds individual beams, a chain of beams, or beams along grid lines.
Brace
34,973
Adds diagonal structural members connected to beams and columns.
StructuralColumn
34,974
Adds a vertical load-bearing element to the building model.
StructuralWall
34,975
Creates a load-bearing or shear wall in the building model.
SpanDirectionSymbol
34,980
Places a span direction symbol on a structural floor.
StructuralFloor
34,985
Creates a structural floor (slab) for the current level of the building model.
Scale
34,986
Resizes the selected item.
StructuralSettings
34,993
Defines settings for analytical elements and the display of structural framing.
ReferenceLine
34,994
Creates a reference line that you can use when creating a new family, or to create constraints for the family.
RebarCoverSettings
35,003
Adds, removes, or modifies the default rebar cover settings.
ShowMassFormAndFloors
35,060
Displays mass forms and any mass floors you have specified in all views.
CurtainSystemByFace
35,072
Creates a curtain system on the face of a mass or generic model.
WallByFaceWall
35,074
Creates walls using faces of a mass or generic model.
ShowMassByViewSettings
35,075
Displays masses based on the settings for the current view. By default, masses are turned off.
ShowMassSurfaceTypes
35,078
Displays mass faces, including any glazing and shades that have been specified.
ShowMassZonesAndShades
35,079
Displays mass zones, glazing, and shades if they have been specified.
StructuralRebar
35,098
Places planar, multi-planar or free form rebar.
CopyMonitorUseCurrentProject
35,107
Monitors grids, levels, columns, walls, floors, and openings within the current project.
CopyMonitorSelectLink
35,108
Copies selected elements from a linked project to the host project, and monitors changes to these elements.
CoordinationReviewUseCurrentProject
35,110
Displays warnings for monitored elements in the current project.
CoordinationSelectLink
35,111
Displays warnings for monitored elements between linked projects and the host project.
Wall
35,113
Creates foundations hosted by walls.
Isolated
35,114
Adds footings or pile caps to the building model.
MaterialTag
35,145
Tags a selected element using the description specified for its material.
CoordinationSettings
35,149
Specifies mapping behavior when copying MEP fixtures from a linked model into the current project.
Slab
35,156
Adds a foundation slab to the building model.
ElementKeynote
35,158
Tags a selected element using the keynote specified for the element type.
MaterialKeynote
35,159
Tags a selected element using the keynote specified for its material.
UserKeynote
35,160
Tags an element with a keynote that you select.
LoadSelection
35,180
Loads a previously saved selection set.
SaveSelection
35,181
Saves the currently selected elements as a set.
EditSelection
35,183
Edits a previously saved selection set.
ActivateControlsAndDimensions
35,194
Enable or disable the visibility of pins, constraints, and temporary dimensions when multiple elements are selected.
ShowWorksharingMakeEditableControls
35,195
Enables/Disables display of “Make Editable” controls when elements are selected.
MultiCategoryTag
35,203
Attaches tags to elements of multiple categories, based on a shared parameter.
BoundaryConditions
35,223
Defines point, line, and area boundary conditions in an analytical model.
StructuralPathReinforcement
35,225
Sketches the path of evenly placed reinforcing bars that are created perpendicular to the sketch.
PathReinforcementSymbol
35,228
Places a symbol that shows extents and hook types for the selected path reinforcement.
OpeningByFace
35,253
Creates an opening that is perpendicular to the selected face of a roof, floor, or ceiling.
VerticalOpening
35,254
Cuts a vertical opening through a roof, floor, or ceiling.
DormerOpening
35,255
Cuts a roof to create an opening for a dormer.
WallOpening
35,256
Cuts a rectangular opening in a straight or curved wall.
ShaftOpening
35,257
Creates a vertical opening that spans multiple levels, cutting through intervening roofs, floors, and ceilings.
SpotSlope
35,259
Displays the slope at a specific point on a face or an edge of a model element.
HideElements
35,261
Hides selected elements in the current view.
ToggleRevealHiddenElementsMode
35,263
Toggle reveal hidden elements mode.
OverrideByElement
35,265
Changes the graphic display settings for selected elements in the current view.
OverrideByFilter
35,266
Changes the graphic display settings for all elements in the view that meet the criteria specified in a filter.
DuplicateAsDependent
35,280
Creates a view that is dependent on the original view.
MaskingRegion
35,287
Creates a graphic that obscures elements in a project or family.
MajorSegment
35,293
Identifies one segment of the rebar shape that maintains its general position in rotation and auto-expansion behaviors.
ReinforcementSettings
35,300
Customizes reinforcement settings such as rounding parameters, rebar hosting and abbreviations of area/path reinforcement tagging.
ExportFBX
35,350
Saves a 3D view as an FBX file.
OpenFamily
35,365
Opens a Revit family.
CreateParts
35,425
Creates parts from the layers or subcomponents of a selected element.
ViewCube
35,458
Shows or hides the ViewCube, which allows you to change the orientation of a 3D view.
BeamAnnotations
35,585
Places multiple beam tags, annotations, and spot elevations.
AllowableBarTypes
35,599
Defines the allowable rebar types (diameters) of the shape type.
MacroManager
35,602
Opens the Macro Manager to run, create, or delete a macro.
MacroSecurity
35,603
Specifies the default security settings for macros in the Revit application.
NavigationBar
35,631
Shows or hides the navigation bar, which provides access to the ViewCube, SteeringWheels, and zoom/pan functions.
FormWorkPlaneView
35,703
Enables the Workplane Viewer.
ReconcileHosting
35,708
Lists tags and elements hosted by the linked model that require review, due to changes in the linked model.
DiameterDimension
35,778
Places a dimension that measures the diameter of an arc or circle.
DiameterDimensionTypes
35,779
Defines attributes for diameter dimensions.
StructuralFabricArea
35,781
Located on the Reinforcement panel of the Structure tab (or Modify tab for floors, walls and foundation slabs).Sketches the boundary of a fabric area to populate with fabric sheets.
FabricReinforcementSymbol
35,793
Located on the Symbol panel of the Annotate tab.Places a symbol that represents the fabric sheet.
PlaceOnStairOrRamp
35,807
Places a railing on a stair or ramp.
DuctPressureLossReport
35,811
Generates a pressure loss report for one or more duct systems.
PipePressureLossReport
35,812
Generates a pressure loss report for one or more pipe systems.
OpenSampleFiles
35,815
Opens a Revit sample file.
SingleFabricSheetPlacement
35,823
Places a single fabric sheet on floors, walls, and foundation slabs.
AlignedMultiRebarAnnotation
35,831
Tags multiple elements with a single annotation that displays aligned dimensions between references as well as parameters from the referenced elements. For example, all rebar in a rebar set can be referenced with a single tag.
LinearMultiRebarAnnotation
35,832
Tags multiple elements with a single annotation that displays linear dimensions between references as well as parameters from the referenced elements. For example, all rebar in a rebar set can be referenced with a single tag.
FabricationSettings
35,839
Opens the Fabrication Settings dialog.
LinkIFC
35,853
Links an IFC file to the current project to reference its information for additional design work.
SelectionBox
35,857
Isolates selected elements in the current view (if a 3D isometric view) or the default 3D view.
InsertCoupler
35,862
Places a reinforcement coupler element to join rebar in a host.
PAndIDModeler
35,882
Create a 3D piping model directly from a 2D P&ID drawing in the cloud.
PAndIDSettings
35,883
Manage the mappings between elements, such as services and families, between the P&ID drawing and the Revit model.
TogglePAndIDModelerBrowser
35,884
Toggle P&ID Modeler browser.
DuctAccessory
37,004
Places a duct accessory. These accessories include dampers, filters and smoke detectors.
AirTerminal
37,005
Places a register, grille, or diffuser.
Duct
37,006
Draws rigid round, rectangular, or oval ductwork.
MechanicalEquipment
37,008
Places mechanical equipment such as boilers, furnaces, or fans.
DuctFitting
37,009
Places a duct fitting. These fittings include elbows, tees, wyes, crosses, and other types of fittings.
FlexDuct
37,010
Draws round and rectangular flexible ductwork.
ConvertToFlexDuct
37,014
Changes a length of ductwork connected to an air terminal from rigid duct to flexible duct.
DuctLegend
37,027
Places a legend to indicate the color fills associated with ductwork in duct systems.
PanelSchedules
37,053
Generates a panel schedule for a specified panel.
ElectricalSettings
37,054
Opens the Electrical Settings dialog to define distribution systems, wire types, cable tray and conduit sizes, and demand factors.
LoadClassifications
37,055
Assigns and specifies demand factors to a load classification.
LightingFixture
37,059
Places lighting fixtures such as ceiling, wall, and recessed lights.
ElectricalEquipment
37,060
Places electrical equipment such as panels and switch gear.
ElectricalFixture
37,061
Places electrical devices such as receptacles, junction boxes, and other power devices.
CheckCircuits
37,062
Verifies all circuits for proper connections to panels and valid system assignments. Errors are reported in a warning dialog.
DemandFactors
37,068
Applies demand factors to a panel.
Pipe
37,100
Draws rigid piping.
FlexPipe
37,102
Draws flexible piping.
PipeFitting
37,103
Places a pipe fitting. These fittings include elbows, tees, wyes, crosses, unions, and other types of fittings.
PipeAccessory
37,105
Places a pipe accessory. These accessories include connectors, valves, and inline water heaters.
ArcWire
37,106
Draws arced wire runs.
PipeLegend
37,149
Places a legend to indicate the color fills associated with piping systems.
CheckPipeSystems
37,155
Verifies all pipe systems for properly connected pipes and valid system assignments.
CheckDuctSystems
37,167
Verifies all duct systems for properly connected ductwork and valid system assignments.
MechanicalSettings
37,168
Opens the Mechanical Settings dialog.
PlumbingFixture
37,203
Places plumbing fixtures. These fixtures include sinks, water closets, tubs, drains, and various appliances.
Sprinkler
37,206
Places a sprinkler.
ElectricalConnector
37,217
Adds an electrical connector to a component.
DuctConnector
37,218
Adds a duct connector to a component.
PipeConnector
37,219
Adds a pipe connector to a component.
Zone
37,244
Defines HVAC zones within a project.
BuildingOrSpaceTypeSettings
37,259
Opens the Building and Space Type Settings dialog to manage building and space parameters and schedules.
ChamferedWire
37,260
Draws chamfered wire runs.
SplineWire
37,261
Draws splined wire runs.
Communication
37,278
Places communication devices such as intercom system components.
Data
37,279
Places data devices such as ethernet and other network connections.
FireAlarm
37,280
Places fire alarm devices such as smoke detectors, manual pull stations, and annunciators.
Lighting
37,281
Places lighting switches such as daylight sensors, occupancy sensors, and manual switches.
NurseCall
37,282
Places nurse call devices such as call stations, code blue stations, and door lights.
Security
37,283
Places security devices such as door locks, motion sensors, and surveillance cameras.
Telephone
37,284
Places a telephone jack.
CableTrayConnector
37,291
Adds a cable tray connector to a component.
ConduitConnector
37,292
Adds a conduit connector to a component.
CableTrayFitting
37,295
Places a cable tray fitting. These fittings include elbows, tees, wyes, crosses, and other unions.
ConduitFitting
37,296
Places a conduit fitting. These fittings include elbows, tees, wyes, crosses, and other unions.
CableTray
37,297
Draws cable tray runs such as rigid ladder or channel cable tray.
Conduit
37,298
Draws rigid conduit runs.
ManageTemplates
37,314
Manages and applies panel schedule templates to existing schedules in the project.
EditATemplate
37,315
Modifies a specific panel schedule template.
ParallelConduits
37,361
Creates parallel runs of conduit based on an initial conduit run.
DuctPlaceholder
37,427
Draws placeholder duct without elbow or tee fittings.
PipePlaceholder
37,428
Draws placeholder pipe without elbow or tee fittings.
ParallelPipes
37,441
Creates parallel runs of pipe based on an initial pipe run.
ShowDisconnects
37,444
Controls the display of graphical disconnect warnings for duct, pipe, conduit, cable tray, electrical circuits, and fabrication hangers.
MultiPointRouting
37,574
Automatically build a run of connected MEP fabrication parts by clicking points in the model.
SystemZone
37,617
Create a system-zone for analytical spaces.
SiteComponent
40,239
Adds site-specific elements, such as trees, parking islands, and fire hydrants.
AreaAndVolumeComputations
40,382
Specifies how areas and volumes are calculated, and creates area schemes.
ShowWorkPlane
40,484
Displays or hides the active work plane in the view.
Fascia
40,601
Adds fascia to the edge of a roof, soffit, or other fascia, or to model lines.
Gutter
40,602
Adds a gutter to the edge of a roof, soffit, or fascia, or to model lines.
SlabEdgeFloor
40,603
Shapes the horizontal edge of a floor slab.
CheckSpelling
40,986
Checks the spelling of text notes in a selection or in the current view or sheet.
RepeatingDetailComponent
42,058
Repeats a detail component along a path.
InsertViewsFromFile
42,309
Copies specified views (sheets, schedules, or drafting views) from a project file and saves them in the current project.
Insert2DElementsFromFile
42,310
Copies 2D elements from a detail view (saved in another project) into a detail view in the current project.
SaveAsLibraryView
42,312
Saves a copy of all loaded families, the selected family, group, or view to your library.
AutomaticBeamSystem
42,398
Creates a layout that is used to control the number and spacing of a series of parallel beams.
PlaceMass
42,644
Places an instance of a mass family in the project.
InPlaceMass
42,645
Creates a mass that is unique to the project.
SynchronizeNow
42,654
Updates a local copy of a workshared project using settings from the Synchronize with Central dialog.
StructuralTrusses
43,213
Adds a truss to the structure model.
CreateAnAreaBasedLoad
43,641
Creates an area based load from the area defined by the area based load boundaries.
AreaBasedLoadBoundary
43,647
Places a boundary line for electrical area based loads.
EquipmentLoad
43,648
Opens the System Browser to define equipment loads, such as a chiller or other specific equipment.
MEPFabricationDuctworkStiffener
43,659
Places a stiffener on fabrication ductwork.
ShowBoundaryOpenEnds
45,665
Displays dots on the open ends of area based load boundary lines.
MechanicalControlDevice
45,673
Places a mechanical control device such as thermostats, CO2 sensors, and humidistats.
PlumbingEquipment
45,674
Places plumbing equipment such as hot water heaters, domestic water pumps, and sewage pumps.
HideBoundaryOpenEnds
45,676
Hides dots that display on the open ends of area based load boundary lines.
ShowLastReport
46,061
Displays the most recent interference check report.
GraphicalColumnSchedule
46,139
Creates a graphical column schedule for the project.
ApplyCoping
46,450
Adds coping to steel beams and columns.
RemoveCoping
46,451
Removes coping from steel beams and columns.
BeamSystemSymbol
46,567
Places a beam system span tag.
StructuralAreaReinforcement
46,932
Sketches the boundary of an area to populate with rebar.
AreaReinforcementSymbol
46,959
Places a symbol that shows extents and hook types for the selected area reinforcement.
SolidSweptBlend
47,163
Creates a blend that sweeps along a defined path.
VoidSweptBlend
47,164
Creates a blend that sweeps along a defined path, and uses the resulting 3D shape to remove part of a solid 3D shape.
EditRebarCover
48,583
Edits the rebar cover references of an entire rebar host or an individual face.
ColorSchemes
48,739
Creates or modifies a color fill scheme for rooms and areas.
AnalyticalLink
48,756
Creates an analytical element that connects two separate analytical nodes.
TrimOrExtendToCorner
48,952
Trims or extends elements (such as walls or beams) to form a corner.
TrimOrExtendSingleElement
48,953
Trims or extends one element (such as a wall, line, or beam) to a boundary defined by another element.
TrimOrExtendMultipleElements
48,954
Trims or extends multiple elements (such as walls, lines, and beams) to a boundary defined by another element.
AlignedDimension
48,955
Places dimensions between parallel references, or between multiple points.
LinearDimension
48,956
Places horizontal or vertical dimensions that measure the distance between reference points.
AngularDimension
48,957
Places a dimension that measures the angle between reference points sharing a common intersection.
RadialDimension
48,958
Places a dimension that measures the radius of an inner curve or fillet.
ArcLengthDimension
48,959
Places a dimension that measures the length of a curved wall or other element.
MeasureBetweenTwoReferences
48,962
Measures the distance between two elements or references.
MeasureAlongAnElement
48,963
Measures the length of an element.
MirrorDrawAxis
49,000
Draws a temporary line to use as an axis for mirroring.
KeyboardShortcuts
49,211
Assigns key sequences to tools.
BeamOrColumnJoins
49,543
Adjusts how beams and columns frame into one another.
SaveAsTemplate
49,783
Saves the current Revit project file as a template.
SaveAsFamily
49,784
Saves the current family.
HalftoneOrUnderlay
49,786
Customizes halftone and underlay elements in view.
Multiplanar
50,051
Toggles the ability to define a rebar shape bent in more than one plane.
OpenProject
51,800
Opens a Revit project.
LoadCases
53,531
Adds and edits load cases for the analytical model.
LoadCombinations
53,532
Adds and edits load combinations for the analytical model.
BoundaryConditionsSettings
53,534
Selects the family symbol and adjusts the spacing for boundary conditions.
LoadsScalingDisplay
53,538
Overrides the load type graphics scale using the project scale.
FindOrReplace
53,591
Finds and replaces text in an open project file.
EnergySettings
53,612
Specifies parameters used to create the energy analytical model.
Generate
53,613
Creates the energy analytical model and generates design options and potential performance outcomes with Insight.
ExportGBXML
53,615
Saves the model as a gbXML file.
GuideGrid
53,675
Creates a new guide element in the active sheet to help align elements within and between sheets.
CreateAssembly
53,677
Creates an assembly from elements you select in the drawing area.
StairTreadOrRiserNumber
53,827
Creates a sequence of tread or riser numbers for a run in plan, elevation, or section views.
ManageConnectionToARevitServerAccelerator
53,949
Specifies the Revit Server Accelerator to use for worksharing, or changes the accelerator to which you are connected.
RenderInCloud
53,961
Renders 3D views online to create still images or interactive panoramas.
RenderGallery
53,962
Opens your online gallery of completed and in-progress renderings in a web browser.
CreateEnergyModel
53,964
Creates the energy analytical model.
DisplaceElements
54,029
Creates a view-specific representation of model elements that can be displaced in the view.
GlobalParameters
54,055
Specifies parameters that can be added to a project, and used to define values of other parameters.
Collaborate
54,057
Enables collaboration so team members can work on a model simultaneously.
CollaborateInCloud
54,058
Enables collaboration in the cloud, which allows team members to work on a model simultaneously.
PublishSettings
54,064
Selects the views and sheets to publish to the cloud.
AssemblyCode
54,096
Specifies the location of the assembly code file or reloads the assembly code table from the current file.
RevealObstacles
54,111
Highlights categories that are considered obstacles in the view.
PathOfTravel
54,122
Creates a path of travel along the shortest distance between 2 selected points.
MultipleValuesIndication
54,124
Specifies the value indicated for a parameter when multiple elements with different parameter values are selected.
MultiplePaths
54,125
Places multiple paths of travel between two selected points using a specified minimum path separation for each path.
OneWayIndicator
54,126
Place a one-way annotation family into the view.
PeopleContent
54,127
Place a family to indicate a person and a physical distance radius into the view.
SpatialGrid
54,128
Place a square or hexagonal grid in a room element.
LoadFamilyIntoProjectAndClose
54,133
Loads the family into open projects or family files and closes the family after it loads.
FabricationPart
54,149
Displays the MEP Fabrication Parts palette.
LoadRebarShapeIntoProjectAndClose
54,151
Loads the rebar shape into open projects or family files and closes the family after it loads.
Dynamo
54,157
Provides access to Dynamo, an open source visual programming platform for designers.
DeleteEnergyModel
54,224
Removes the energy analytical model from the Revit project.
Shorten
54,264
Creates a shorten object on the selected beam that can trim or extend the beam.
CopeSkewed
54,286
Creates a skewed cope at the selected beam end, either at the top or at the bottom.
CornerCut
54,288
Creates a cut on the corner of a selected plate.
Welds
54,290
Inserts a weld on one of the available edges of the model elements to be connected.
Plate
54,292
Creates a structural plate in the building model.
Bolts
54,293
Inserts bolts and the related holes in the selected model elements.
Holes
54,294
Inserts holes on the selected face of model elements.
Anchors
54,295
Inserts anchors and the related holes in the selected model elements.
ShearStuds
54,296
Creates shear studs and the related welds on the selected face of model elements.
ContourCut
54,297
Creates a contour cut on the selected faces of a beam or a plate.
Cope
55,304
Creates a parametric cope on intersecting beams and the related connection between the beams.
Miter
55,305
Creates a miter cut vertically or at the bisecting line of two beams and the related connection between the beams.
SawCutFlange
55,306
Creates a cut on a beam adjusted according to the flange of another intersecting beam and the related connection between the beams.
SawCutWeb
55,307
Creates a cut on a beam adjusted according to the web of another intersecting beam and the related connection between the beams.
CutThrough
55,308
Creates a cut through a model element around the contour of another intersecting model element. The weld between the two elements is also created.
CutBy
55,309
Creates a cut on a model element along the shape of another intersecting model element and a cut through the intersecting element. The connection between the two elements is also created.
ToggleHome
56,242
Toggle Revit Home.
SaveAsCloudModel
56,243
Saves the current Revit model to the cloud.
SystemsAnalysis
56,254
Performs a systems analysis and generates a report for whole building energy simulation and analysis.
LinkPDF
56,281
Inserts a link to a PDF into a model view.
LinkImage
56,282
Inserts a link to an image into a model view.
AnalyticalMember
56,298
Places an analytical member in the project.
BatchPrint
56,308
Print a large number of drawings with a batch job.
WorksharingMonitor
56,309
Launches Worksharing Monitor to manage a file-based workshared model.
SharedViews
56,329
Opens and closes the Shared Views palette.
ResetSharedCoordinates
56,335
Eliminate shared coordinates in the host model.
ElectricalAnalyticalLoadTypeSettings
56,345
Opens the Electrical Analytical Load Type Settings dialog to define the power requirement for area-based loads.
OpenCloudModel
56,379
Opens a Revit cloud model.
DynamoPlayerForSteel
56,443
Places steel connections on selected elements using pre-defined rules.
PanelByBoundary
56,448
Creates a planar analytical panel for the current work plane after a sketch of the contour.
Toposolid
56,481
Creates a solid topographical element.
CreateFromImport
56,504
Creates a solid topographical element.
AnalyticalAutomation
56,516
Automates the creation, element connection, and update of the analytical model, using the physical representation as context.
RebarBendingDetail
56,523
Creates realistic or schematic bar bending details for the selected individual rebar or sets.
PanelByExtrusion
56,525
Creates an analytical panel perpendicular to the current work plane after a sketch of the path.
CoordinationModelLocal
56,559
Links a NWD or NWC file to provide context for the Revit model.
CoordinationModelAutodeskDocs
56,560
Links a coordination model view from Autodesk Docs into the current project.
Loads
56,584
Defines point, line, and area loads in an analytical model.
PropertyLineData
56,663
Define the angle display and units used when creating and labeling property lines.
56,711
Creates PDF files.
CoordinationModelChanges
56,713
Displays the overview of changes between the current version of a linked coordination model from Autodesk Docs and any of its previous versions.
ToposolidByFace
56,723
Creates an element using a non-vertical face of a mass.
OperatingSchedules
56,745
Opens the Building Operation Schedules Editor.
ToposolidSmoothShading
56,764
Display toposolid elements in the model with smoothed surfaces.
LaunchAsApp
56,806
Open the Content Catalog in a separate window.
LaunchInBrowser
56,807
Access the Content Catalog in the default browser.
LaunchInDockedWindow
56,808
Access the Content Catalog in the Revit session from a docked window.
SpaceNaming
57,269
Assigns the names and numbers from architectural rooms to MEP spaces used for building performance analysis.
DynamoPlayer
57,282
Preview, select, and run your Dynamo graphs from a single dialog.
RepairCentralModel
57,283
Repairs a corrupt central model.
LinkTopography
57,288
Links existing topography to the current Revit model.
Optimize
57,289
Access energy and environmental performance data in Insight.
OpenRevitFile
57,601
Opens any Revit file type.
Close
57,602
Close Revit.
Save
57,603
Saves the currently open project file.
SaveAsProject
57,604
Saves the current Revit project file.
PrintSetup
57,606
Specifies print options.
57,607
Sends the current drawing area or selected views and sheets to a printer or a printable file.
PrintPreview
57,609
Displays a preview version of the current view or sheet to print.
CopyToClipboard
57,634
Copies selected elements to the clipboard.
CutToClipboard
57,635
Removes selected elements, and places them on the clipboard.
PasteFromClipboard
57,637
Pastes elements from the clipboard into the current view.
TabViews
57,650
Arranges all open views in the drawing area as tabs in a single window.
TileViews
57,652
Arranges all open views within the application window, tiled so you can see each one in the drawing area.
CanvasTheme
57,654
Sets the color theme of the canvas to dark or light.
ExitRevit
57,665
Exit Revit.
StatusBar
59,393
Displays the status bar at the bottom of the Revit window.